DIY Electric Go Kart Car Using PVC Pipe At Home


DIY Learn how to build homemade electric go kart, It’s base structure made by PVC pipe and wood and powered by high torque DC motor. Build your own Go-Kart at home.

Now just because you don’t need a full welder, you will still need some power tools to cut wood. Go-Karts: They’re the most fun a kid can have on four wheels.

I have got the plans and list of parts you need to build one for your family and have the kids cruising around before sundown.


  1. 1″ (25mm) PVC pipe and coupling
    PVC pipe: 30 feet, PVC Tees: 27 pieces, Elbow: 16 pieces, 4-Way: 6 pieces, 45 degree Elbow: 8 pieces, PVC cap: 5 pieces
  2. Plywood
    Size: 120 cm X 64 cm
  3. 18V DC Mega Torque Geared Motor
    Speed: 300 RPM, Watt: 250W, Torque: 92 kgcm
  4. Bicycle wheel
    Quantity: 4 pieces, size: 14″ (inches)
  5. Motor Shaft Coupling
    Quantity: 2 pieces, size: 8 mm to 10 mm
  6. Ball Bearing
    Quantity: 10 pieces, Type: 6201-2RS
  7. Door hinge (360 degree)
    Size: 10 cm
  8. PWM DC motor speed controller
    Ampere: 40A
  9. 12V DC Battery
    Up to 40Ah